Showing 21–32 of 32 results
Description:
Laser cutting machine glows as laser power drives laser tube, whose light will be passed on to laser head. Then the focusing lens installed on the laser head can assemble light to a point and the point can reach to high temperature, which can instantly turn materials into gas. Thus, air exhauster can absorb the vapor and cutting can be achieved. CNC Laser Cutting Machine’s work area reaches 1500×3000mm.
Description:
KA-H10 horizontal tank welder is a welding equipment is used to drive the gear rack and pinion, which is widely used in horizontal and vertical butt welding. It is especially suitable for medium and heavy plate welding and large pipe girth welding.
By adjusting the welding torch position and angle, it can also be welding, horizontal welding, overhead welding and arc welding.The trolley body, swinging device and control panel are separated, which can be welded on the track. It is convenient to install and remove the rail with a strong magnet on the workpiece.
Description
Our BYGG series portable shot blasting machine is an advanced shot blasting equipment in both domestic and overseas markets. This mobile shot blaster features environmental protection, energy saving, high efficiency, free of dust and low noise. It only needs one operator, saving labor cost. It is suitable for cleaning tanks for petrochemical and shipbuilding industries, wind power tower, etc.
Working Principle
Abrasive media are lifted to the drum sieve by the bucket elevator. The drum sieve has inside and outside spiral blades. Inside blades can discharge large pieces of mixture; abrasive, sand and dust are sieved, pushed and then fully separated by outside blades.
Description
Hydraulic jacking equipment is a lifting equipment mainly used for lifting installation of all kinds of large storage tank, gas holder, desulfurization tower in power plants, steel structure, etc.
Features
1. This hydraulic lifting equipment is designed with all kinds of hydraulic valves that control the lifting operation.
2. Control system of this hydraulic jacking equipment includes the console, pump controller, inductor and connecting cables. It controls the whole system by receiving information and instructions from the sensor.
3. Our hydraulic lifting equipment is designed with feed-through structure, so the steel wire can be inserted through the center of the jack.
4. The upper and lower clamping devices are integrated with this lifting jack, and its top is connected with steel wire through using claw plate.
5. The hanging piece is connected with the steel wire through component clamping device.
Description
CSAW-1000 submerged arc welding tractor is mainly used for welding flat or corner joints and the cylinder of tank. This automatic submerged arc welding machine is applicable for welding longitudinal seams of cylinder with a diameter larger than 800mm. Tractors with different configurations are available.
Features
1. This submerged arc welding tractor is self-propelled for butt and fillet joints on lengthy welding applications.
2. Stable and unique three- or four-wheel design.
3. Walking worm drive with clutch.
4. Flexible system allows set up with or without a track.
5. This automatic submerged arc welding machine is equipped with Miller welding system.
6. Infrared laser sight facilitates welding alignment.
7. Wire diameter range: 2.4mm – 4.8mm.
Description
MAGW-I LNG/LPG tank vertical welder is designed to weld vertical seam of special materials (such as stainless steel, 5% Ni steel and 9% Ni steel). It is equipped with a MAG/MIG welding system. Our vertical tank welding machine features high efficiency, X-ray weld seam and low heat input.
Description
TEGW two-electrode electrogas welder is designed for welding thick plates requiring high heat input. This electrogas welding machine is widely used to weld sheer strakes and hatch side coamings of container ships.
Electrogas welding machine (EGW) is a highly-efficient automatic welding equipment manufactured to realize closed-loop weld current. It is designed with optional ways of mounting, including permanent magnet adsorption, electro magnet adsorption, vacuum absorption with a vacuum sucker, switch permanent magnet adsorption, making it convenient to assembly and disassembly. This electrogas welding machine is widely used for welding of thick plates in industries like oil, chemical, blast furnace, shipbuilding, etc.
Features
1. The liquid level of the molten pool can be automatically controlled.
2. Wire extension can be automatically adjusted.
3. The travel carriage is small in size, light in weight, as well as flexible and convenient to use.
4. Modular design of this vertical electrogas welder facilitates upgrade of the machine.
5. Welds of this electrogas welding machine are done in single pass, no inter-pass cleaning.
6. Welding plate thickness: 10mm~50mm.
WUXI ABK provides submerged arc welding machine used for vertical cylinder construction. Different from the current market, our MSHW series automatic girth welder is equipped with a stable dual drive system. The self-propelled submerged arc welding system can help reduce the constructions time to 25% of the manual welding. The transverse welding machine is used for welding the inner and outer ring of the vertical cylinder. We offer automatic girth welders with 3 configurations for various types of tanks.
By absorbing merits of similar Gantry Welding Machine and using new technology from abroad and China domestic, Wuxi ABK is the professional producer to develop and manufacture the family Gantry Welding Machine products including H-beam (light steel, heavy steel), T-beam welding production line, H-beam flange straightening machine, and steel structure cold roll forming production line as well as CNC waterjet cutting machine. With years development, ABK Gantry Welding Machine have been spread over Saudi Arabia, Russia, Middle Asian, Southeast Asian, Australia, Europe, South American, North American, etc. Look forward to establishing mutually beneficial cooperation.
H-beam assembly machine is a kind of equipment specially used for H-beam assembly, which completes the assembly requirements of various types of H-beams through automation. It can greatly improve the production efficiency and product quality, reduce the waste of manpower, optimize the production process, and make the complex assembly task of H-beam members simple and easy, so it is one of the essential and important equipment in modern production.
By absorbing merits of similar shot blasting machine and using new technology from abroad and China domestic, Wuxi ABK is the professional producer to develop and manufacture the family shot blasting machine products including box beam production line, T-beam welding production line, bridge-face U-stiffer welding production line, and steel structure cold roll forming production line as well as CNC waterjet cutting machine. With years development, ABK shot blasting machine have been spread over Saudi Arabia, Russia, Middle Asian, Southeast Asian, Australia, Europe, South American, North American, etc. Look forward to establishing mutually beneficial cooperation.
